Shore Pac^® Slurry Maintenance

The slurry level shall be maintained at least 1.8 meters (six feet) above the water table, or as such higher level that is required to overbalance hydrostatic soil pore pressure and maintain soil stability. If the slurry drops below the specified level, the operation shall be paused and the proper slurry level re-established before proceeding. In some situations, the Manufacturer may recommend that the slurry be maintained at less than 1.8 meters above the water table, to reduce rates of fluid loss if soil stability is being maintained.

The point of reference for selection and maintenance of slurry level shall always be the water table (piezometric level). This applies even in situations where casing or other protective sleeve has been placed to a depth at or below the water table. The presence of casing does not remove the requirement to keep the slurry level above the water table. Attempts to excavate or hold open an excavation in saturated or unstable soils with inadequate slurry head pressure; even with casing extended into the water table, can be expected to result in soil collapse below the casing.

APPLICATIONS

ASSOCIATED DOCUMENTS

• Complete Slurry Drilling and Mixing Guide